Overlays & Resurfacing
Desert Brand

Desert Brand

Desert Crete Texture/Overlay System is designed to repair driveways, patios, pool decks, entryways and walkways and provide a hard wearing, attractive finish.

Desert Crete Texture / Overlay System

Desert Brand

Desert Brand

Desert Crete Decking System is a fire-retardant walking deck and roof covering system. When installed as specified, the system may be used as a walking surface for most types of exterior floors, decks and stairs that are common within buildings.

Desert Crete Decking System

ProSpec

ProSpec

ProSpec Feather Edge is a premium, polymer modified, rapid setting, trowelable underlayment that results in a very smooth, ultra thin finish applied over a wide array of subfloors.

ProSpec Level Set Deep Pour 3 Underlayment is an eco-friendly calcium aluminate cement based, single component, non-shrink, fast setting, self-leveling underlayment that provides a flat, smooth, furable surface up to 3 inches in depth in one lift or the installation of floor finishes.

ProSpec Level Set 100 Underlayment is a polymer modified, portland cement based, self-leveling underlayment. For interior use only.

ProSpec Level Set 200 Underlayment is a calcium aluminate cement, non-gypsum based self-leveling underlayment that provides a flat, smooth, furable surface for the installation of floor coverings. For interior use only.

ProSpec Level Set 300 Underlayment is a premium, calcium aluminate cement, non-gypsum based, self-leveling underlayment that provides a flat, smooth, durable surface with minimum installation time and cost. For interior use only.

ProSpec Level Set Wear Topping is a premium, calcium aluminate cement-based, high strenth, abrasion-resistant, self-leveling wear surface for stains, sealers and coatings. For interior use only.

ProSpec Trowel Grade Underlayment is a sanded polymer modified cement based floor underlayment for interior floor repair applications.

ProSpec Permaflex 500 portland cement based mortar containing a unique dispersible powdered polymer which provides high bond strength, impact strength and extended open time over ordinary sanded thin set mortars. It is specifically designed for bonding ceramic tile and natural stone to difficult to bond substrates such as exterior grade plywood.

ProSpec Mix 240 AE is an air entrained super plasticized high performance (ready mix) concrete mix with corrosion inhibitor.

ProSpec Blendcrete one component, polymer modified, cement based concrete and masonry patching compound.

ProSpec Level Set LW-60 Underlayment is a premium lightweight Calcium Aluminate Cement (CAC) non-gypsum based, single component underlayment that provides a flat, smooth, durable floor without the weight of a normal portland cement or gypsum underlayment.

ProSpec Feather Edge Data Sheet
ProSpec Level Set Deep Pour 3 Data Sheet
ProSpec Level Set 100 Data Sheet
ProSpec Level Set 200 Data Sheet
ProSpec Level Set 300 Data Sheet
ProSpec Level Set Wear Topping Data Sheet
ProSpec Trowel Grade Underlayment Data Sheet
ProSpec Permaflex 500 Data Sheet
ProSpec Mix 240AE Data Sheet
ProSpec Blendcrete Data Sheet
ProSpec Level Set LW-60 Data Sheet

ProSpec

ProSpec

ProSpec Level Set Primer is a liquid polymer latex bonding agent for interior applications of Level Set products. .

ProSpec Level Set Primer Plus is a highly concentrated film-forming dispersion for priming very dense, smooth non-absorbent substrates prior to the installation of Level Set products.

ProSpec Moisture Guard Max is a one-coat 100% solids, surface penetrating, film-forming epoxy coating for remediating the moisture vapor transmission related to green and damp concrete surfaces.

ProSpec Level Set Primer Data Sheet
ProSpec Level Set Primer Plus Data Sheet
ProSpec Moisture Guard Max Data Sheet

ProSpec

ProSpec

ProSpec Comercial Anchor Grout is a polymer modified portland cement based anchoring grout.

ProSpec High Strength Precision Grout specially formulated, ready to use, high strength, flowable precision grout.

ProSpec C-1107 Construction Grout is a high strength, nonmetallic, cementitious structural grout.

ProSpec Slab Dowel Grout is a non-shrink high compressive strength, non-metallic grout used for placing prefabricated concrete pavements and typical structural grouting applications.

ProSpec Precast Mortar Grout is fast setting, nonshrink, single component, cementitious mortar grout formulated for precast repairs and erections.

ProSpec Bedding Grout is a non-shrink high compressive strength, non-metallic grout used for placing prefabricated concrete pavements.

ProSpec Acrylic Additive is a liquid acrylic polymer emulsion specifically designed as an admixture for cement-based products.

ProSpec B-730 Mortar Additive is an acrylic polymer emulsion developed to enhance the properties of ProSpec Non-Polymer Modified Thin Set Mortars. B-730 Mortar Additive improves workability, extends open time, increases bond strength, improves flexibility, adhesion, impact strength and freeze thaw resistance.

ProSpec Commercial Anchor Cement Data Sheet
ProSpec High Strength Precision Grout Data Sheet
ProSpec C-1107 Construction Grout Data Sheet
ProSpec Slab Dowel Grout Data Sheet
ProSpec Precast Mortar Grout Data Sheet
ProSpec Bedding Grout Data Sheet
ProSpec Acrylic Additive Data Sheet
ProSpec B-730 Mortar Additive Data Sheet

ProSpec

ProSpec

ProSpec B-6000 Waterproof/Crack Isolation Membrane is a new advanced latex polymer based technology used as a waterproofing membrane underlayment or as part of a crack isolation system.

ProSpec B-6000 Waterproof/Crack Isolation Membrane Data Sheet

ProSpec

ProSpec

ProSpec Vinyl Concrete Patch is a single component, fast-setting, polymer modified portland cement based product for concrete repair.

ProSpec Floor Patch Pro is a fast setting, easy -to-mix, portland cement based patching compound for use under resilient flooring, ceramic tile, hardwood flooring, or any other floor covering surface.

ProSpec Concrete Resurfacer is a polymer modified cement based product used for resurfacing old concrete to make it look new again.

ProSpec Premium Patch 100 is a fast setting, fiber reinforced, high strength cement based repair mortar designed for applications where high early strength gain is needed to reduce down time.

ProSpec Vertical Leveling Mortar is a one component, polymer modified high strength, rapid hardening, portland cement based, concrete repair material designed for vertical and overhead patching and repair work.

ProSpec Vinyl Concrete Patch Data Sheet
ProSpec Floor Patch Pro Data Sheet
ProSpec Concrete Resurfacer
ProSpec Premium Patch 100 Data Sheet
ProSpec Vertical Leveling Mortar Data Sheet

Rapid Set

Rapid Set

Rapid Set Bond Additive is a latex polymer additive that increases the workability and adhesion properties of cement. By adding BOND, your mixture will become much more “sticky” allowing you to successfully bond to a variety of surfaces including concrete, brick, tile, wood, plaster, concrete block, stone, and asphalt.

Rapid Set Dark Color Additive can be added to your cement, concrete, mortar, plaster, and grout mixtures to darken the color. Use increased quantities of DARK to match new concrete to existing concrete or to produce a custom-color concrete.

Rapid Set Fast Additive accelerating additive increases the rate of hardening for cement. FAST is ideal for cold weather applications or for projects that require the fastest set times. 

Rapid Set Flow Additive  performs two functions. First, adding FLOW to your mix will significantly increase the fluidity of the mixture. A stiff mix becomes soupier when using FLOW. Second, FLOW increases the strength and reduces the shrinkage of your mixture when you use the FLOW as a replacement for mixing water.

Rapid Set Control Additive slows down the setting time of cement allowing you more time to place and finish your concrete, mortar, and grout materials. This extra time is often needed when making large or intricate placements (more than one cubic foot) of grout, mortar, or concrete. In warm weather when cement naturally sets faster, SET Control works to slow down the hardening of the cement.

Rapid Set Light Color Additive can be added to your cement, concrete, mortar, plaster, and grout mixtures to lighten the color. Use increased quantities of LIGHT to match new concrete to existing concrete or to produce a custom-color concrete.

Rapid Set Fiber Additive increases impact resistance and controls shrinkage cracking in concrete, mortar, and grout mixes. FIBER is ideal for applications where secondary reinforcement is required. 

Rapid Set Acrylic Primer is a concentrated, solvent free acrylic latex primer that improves the adhesion of Rapid Set TRU Self Leveling to properly prepared concrete. Rapid Set Acrylic Primer also acts to seal porous concrete surfaces to prevent pinholes and bubbles from forming in the finished surface.
Rapid Set Bond Additive Data Sheet
Rapid Set Dark Color Additive Data Sheet
Rapid Set Fast Additive Data Sheet
Rapid Set Flow Additive Data Sheet
Rapid Set Control Additive Data Sheet
Rapid Set Light Color Additive Data Sheet
Rapid Set Fiber Additive Data Sheet
Rapid Set Acrylic Primer Data Sheet

Rapid Set

Rapid Set

Rapid Set Mortar Mix is a versatile product that can be used for general concrete repair, stucco & plaster repair, one-coat exterior plaster, mortar beds, underlayments, and formed work. When mixed with water, Mortar Mix produces a workable, high quality mortar that is ideal where rapid strength gain, high durability and low shrinkage are desired.

Rapid Set Concrete Mix is a multipurpose, Fast-Setting product that can be used for repair and construction of pavements, formed work, footings, setting posts, industrial floors, machine bases, and concrete repair.
Rapid Set Mortar Mix Data Sheet
Rapid Set Concrete Mix Data Sheet

Rapid Set

Rapid Set

Rapid Set Skim Coat is a high bond strength, fast curing, smooth (unsanded), hydraulic cement based material used for floor underlayments, concrete repairs, patching and skim coating on interior and exterior projects.

Rapid Set TRU is for high performance floor topping, underlayment and resurfacing projects. TRU Self-Leveling is ideal for projects that need long flow life and working time while achieving high early strength. TRU Self-Leveling cures to a light off-white color ideal for stained, dyed, or integrally colored floors and decorative embedded aggregate flooring. TRU also grinds and polishes well, making it ideal for polished decorative floors.

Rapid Set Skim Coat Data Sheet
Rapid Set TRU Data Sheet

Rapid Set

Rapid Set

Rapid Set Cement All produces a workable, high quality repair material that is ideal where rapid strength gain, high durability and low shrinkage are desired. Cement All is a multipurpose product that can be used for general concrete repair, doweling and anchoring, industrial grouting, formed work, airport projects, and highway repair.

Rapid Set Cement All Data Sheet

Scofield Systems

Scofield Systems

Scofield Texturetop Stamp Grade provides a durable topping for use where imprinting with stamping tools or embossing with texturing tools is desired.

Scofield Texturetop Stencil Grade provides a durable topping for use where stenciling, embossing, texturing or chemical staining of the surface is desired.

Scofield Texturetop Trowel & Spray Grade provides a fresh surface for concrete where coloring or chemical staining is desired to improve the appearance.

Scofield Texturetop Stamp Spec
Scofield Texturetop Stencil Spec
Scofield Texturetop Trowel Spec

SUPER-KRETE

SUPER-KRETE

Super-Krete Pene-Krete S-1300 is a non-hazardous penetrating sealer for all concrete and masonry substrates. Reduces moisture vapor transmission to eliminate delamination over time. Protects surfaces from freeze/thaw damage, reduces concrete dusting, and increases coating life by as much as 300%.

Super-Krete Pene-Krete Additive S-1400 is a non-hazardous additive for new concrete pours. Mixed with any Portland-cement based product, it will densify the substrate, increase its structural strength, encapsulate and expel exvess alkali, lime and other contaminants and provide waterproofing and resistance to freeze/thaw damage.

Super-Krete Liquid Concentrate S-1100 is a co-polymer to be mixed with sand and cement to level, regarde and resurface. Incredible adhesion, strength and flexibility.

Super-Krete Pene-Krete S-1300 Data Sheet
Super-Krete Pene-Krete Additive S-1400 Data Sheet
Super-Krete Liquid Concentrate S-1100 Data Sheet

SUPER-KRETE

SUPER-KRETE

Super-Krete Bond-Kote S-9300 is a concrete repair and resurfacing product. Just add water and apply as a thin-set overlayment with a Super-Krete squeegee to repair, retore and strengthen concrete surfaces.

Super-Krete Micro-Bond S-9304 is made for micro-topping. It is a cementitious product that contains an ultra fine powder and no sand to create a smoother finish. It can be used for repairing and resurfacing concrete interior floors, countertops, walls, fireplaces and decorative art surfaces. 

Super-Krete Pool Texture S-9400 is a mixture of specially modified aggregates that can be used to create a spray/knockdown texture that blends aesthetic appeal with added slip-resistance.

Super-Krete Underlayment S-7000 is a ready-mix product for use in Super-Krete's Class "A" Fire Rated Waterproof Deck System. It is also perfect for building up low areas in concrete.

Super-Krete Bond-Kote S-9300 Data Sheet
Super-Krete Micro-Bond S-9304 Data Sheet
Super-Krete Pool Texture S-9400 Data Sheet
Super-Krete Underlayment S-7000 Data Sheet

SUPER-KRETE

SUPER-KRETE

Super-Krete S-1400 Pene-Krete Additive is a non-hazardous additive for new concrete pours. Mixed with any Portland-cement based product, it will densify the substrate, increase its structural strength, encapsulate and expel exvess alkali, lime and other contaminants and provide waterproofing and resistance to freeze/thaw damage.

Super-Krete S-8904 Low Gloss Additive is a high solids matte coating that will preserve and protext any above grade concrete, masonry or stone while acting as a tough, durable, graffiti and soil barrier without the wet, gloss look. For use with Super-Krete solvent based sealers to reduce the gloss factor.

Super-Krete S-100 SBA is a bonding agent and Portland cement admixture that provides superior adhesion and flexibility and allows the user to apply materials at any depth or thickness. Bonds to virtually any type of substrate.

Super-Krete S-1400 Pene-Krete Additive Data Sheet
Super-Krete S-8904 Low Gloss Additive Data Sheet
Super-Krete S-100 SBA Data Sheet

Request a QuoteRequest a Quote

Request a Qutoe

To learn more or to receive a free quote, contact one of our Account Managers.

Contact an Account Manager »