Home » Products & Solutions » Concrete Coating » Urethane

Americrete

Americrete Top Coat is a two part, 60% solids, clear finish, urethane top coat that can be applied over all Americrete products. This product creates a hard, protective film which is abrasion, impact, and mar resistant. This product is also chemical resistant to a broad range of chemicals, and is excellent for exteriior applications due to it's ability to retain its gloss over a long period of time.

Americrete Clear Silicone Aliphatic Polyurea is a two component 100% solids, no VOC's, silicone aliphatic polyurea displays fast cure times and excellent adhesion characteristics. A-4300 was designed to be quick gelling (30 minutes) in order to optimize leveling and wetting properties.

Kretus

Kretus Polyaspartic 85 Rapid Cure is a two component, fast drying, modified urethane. This product features good abrasion and chemical resistance and is also non-yellowing.

Life Deck

Life Deck CRU 2000 Series products are two component aliphatic polyester polyurethanes designed as UV resistant, and mar resistant, and chemical resistant finish coats for cementitious floors and floor coating systems.

Life Deck Waterbased CRU is a two component, high solids, water base, aliphatic polyurethane. The UV resistant, mar resistant, chemical resistant nature of this product will cause it to outperform most other types of sealers or topcoats without the unwanted smell of solvents. It is available in a 6 hour cure formula.

Life Deck Stone Glaze is a clear, gloss "wet look" solvent based acrylic sealer and glaze. It is a very hard acrylic polymer that offers better gloss, UV resistance and stain resistance than most other sealers.

Platinum Coatings

Platinum P-AU-30 is a clear, single component, solvent based, VOC compliant sealer and glaze. It is a very hard polyurethane that offers better gloss, UV resistance and stain resistance than most other sealers. The solvent base allows the material to penetrate and adhere to concrete, porous brick & unglazed tile and most types of decorative acyrlic cement coatings. Platinum P-AU-30 creates a glossy "wet look". 

Platinum P-CRU is a two component, high solids, solvenated, aliphatic polyester polyurethane with a Satin or Matte Finish. The UV resistant, mar resistant, chemical resistant nature of this product will cause it to outperform most other types of sealers or topcoats when compared. It is available in a 6 hour cure formula.

Platinum P-PT Polyurea is a two component, high-solids, Polyaspartic Polyurea. The P-PT's quick dry time coupled with its UV resistance, mar resistance, and chemical resistance will outperform most other types of sealers or topcoats. It is available in a 2 hour cure formula.